"ADA YANG TAU AKAI MPC 500"

[DIGITAL_enemy]

HALO TEMEN2 MU TANYA LAGI NEEH ADA YANG TAU KAN AKAI MPC500....
NAH KLO AKAI MPC500 INI BISA SYNCRONIZE GA AMA CDJ OR MIXER PIONEER
JADI MAKSUDNYA BPM AKAI INI SLALU NGIKUT BPM CDJ/MIXER

NAH INI
Specifications

Sound Generator Data format: 16-bit linear WAV
Sampling rate: 44.1 kHz
Memory: 16MB standard (11.5MB sound memory), expandable to 128MB with EXM128 option
Preset sound memory: 5MB Flash
Recording time: 136 sec (16MB mono) 24m28sec (128MB mono)
Polyphony: 32-voice
Dynamic filtering: 2-pole lowpass filter per voice
Number of active programs: 24 (with 48 pads per program)

Effects Effects: 2 stereo effects and Master effect
Effect type: Chorus, Flanger, Bit grunger, 4 band EQ, Compressor, Phase shifter, Tremolo, Flying pan, Reverb, Delay
Master effect: 4 band EQ, Compressor

Sequencer Maximum events: 100,000 notes
Resolution: 96ppq
99 Sequences
48 Tracks per sequence
16 MIDI output channels (16 channels x 1 output ports)
Song mode: 20 songs, 250 steps per song
MIDI Clock Sync: Master/Slave

Drumpads 12 velocity and pressure sensitive pads
4 pad banks

Connections Record input (L and R): 1/4-inch stereo phone x 2, pseudo balanced -40dBu, input impedance 9k ohm; Max. Input level: +10dBu
Stereo output (L and R): 1/4-inch phone x 2 pseudo balanced +11dBu, output impedance 1k Ohms; Max. Output level: +5 dBu
Phones output: 1/4-inch stereo phone x 1, 200mW / 100 ohms
Headphone Output: stereo jack x 1
MIDI: 1 x MIDI In and 1 x MIDI Out [both 5-pin DIN]
USB: Slave connector x 1, USB MASS STORAGE CLASS support (Windows 2000/ME/XP or later version, or Mac OS 9.x/10.x or later version.)

General Display: 2 x 16 character LCD w/back light
Memory card slot:Compact Flash (The size of the compact flash card that MPC500 can handle is from32MB to 2GB)
Power Supply: 12v DC 600mA (negative tip)

Battery life: Approximately 4.5 hours of continuous use with LCD backlight ON.
Dimensions (W x H x D):
266mm x 175mm x 44mm
Weight: 1.34 kg
Data Compatibility MPC1000: SEQ, WAV, PGM
MPC2000/2000XL: SEQ, WAV, SND, PGM (Most parameters of PGM file can be loaded.)
MPC2500: SEQ, WAV, PGM
MPC4000: SEQ, WAV, PGM (DRUM program only. Only note assign and tune are loaded.)
MPC3000: SND (THRU Computer)
Z4/Z8: WAV, PGM (DRUM program only. Only note assign and tune are loaded.)
S5000/6000: WAV only (THRU Computer