Messages

UP..UP..UP....

david penn ama deep josh kpn dpt giliran ya? 

Yaaaaaaaayyy, sundaze with alix alvarez.. 
ga boleh kelewatan nih 

@ ozsy

Thx ya sob,, main2 donk k studio..


@ Lazydog

Cek PM yah sob,, thx...

[-LaMusica-]

For more info contact us :

-LaMusica-

JL.Tebet Raya No.58 B Lt.3
Phone : 021.70376761
            08129888400
            08561669966

Thx... 

Stanton T 120 C

Rp.5.100.000,-

Contact gw aj sob.

LaMusica - 021.70376761

Thx..

@ Hallay

Cek PM yah sob.. 

[-LaMusica-]

For more info contact us ;

-LaMusica-

JL.Tebet Raya No.58 B Lt.3
Phone : 021.70376761
           08129888400
           08561669966

Thx....

[KRK 10s Subwoofer]

KRK 10s Subwoofer -  Ready Stock



Overview,

KRK's KRK10s powered subwoofer is the perfect complement to KRK Rokit, VXT, or any other 4"-8" studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the Rokit and VXT monitors. The front-firing bass port and KRK's trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.

A New Standard in Low Frequency Monitoring.
For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again. Whether you are mixing in a 2.1 or 5.1 surround environment or just looking to upgrade the low-frequency extension of your existing monitors, the KRK10s will provide the low frequency detail and accuracy that will help you to create a better mix.

Don't Be Square, Curves Ahead
Our new subwoofer series has radically curved surfaces for a great look and amazing performance. Finally there is a subwoofer that looks as cool as it sounds. You can even remove the grill to show off that beefy trademark yellow woofer.

Let's Be Up Front
Take a look at competitive subwoofer monitors and you'll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners over-amplifying low frequency information which in turn colors your mix. The superior design of the KRK10s includes front-firing ports which are just the right shape to reduce port turbulence. You'll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.

Feel the Bass
You need to feel the bass and our proprietary signature yellow woofer delivers tight, clear low end response. Our engineers and listening panel took the KRK10s speaker voicing to even more accurate levels. What you hear is what you are intended to hear, coloration is not part of the spec. This performance is brought to you by drivers that are custom-designed by our world-class studio monitor engineering team, for a clear, low-distortion performance.

You've Got Connections
At KRK our focus is your mix. But it doesn't stop at creating accurate monitors. We live this stuff and appreciate the need for monitors that not only sound great but work easily with your particular set up. That's why you'll find plenty of input options with your KRK10s, sure to accommodate any studio environment. So if it's RCA, 1/4 inch (balanced/unbalanced) or XLR inputs you require, KRK10s has got you covered.

Take Control
With a sweepable 50Hz - 130Hz low pass filter, your KRK10s provides flexible control for any monitoring system. It's true that we think your KRK10s sounds best using KRK full range monitors in a system configuration. However, the low pass filter provides great flexibility with any full-range monitor setup.

Use the Features Designed for the Pros
Professional engineers like the ability to hear how the sub is affecting the mix. Plug in any standard latching 1/4 inch footswitch to bypass the KRK10s and send full range audio to your top monitors. A ground lift feature helps tame pesky ground humm.

Bypass Footswitch control
Your KRK subwoofer is equipped with a bypass feature which allows you to defeat the sub and provide full range audio to your recording monitors. You will need to use a standard 1/4 inch, mono, latching footswitch. Any standard latching 1/4 inch mono footswitch (such as the Boss FS-5L) should be compatible.


Technical Specifications :

Configuration:Front loaded, vented subwoofer
System type:Active Subwoofer
Low-Frequency:10" glass aramid composite woofer
Frequency Response: 34Hz - 50Hz to 130Hz Variable
Max Peak SPL:113 dB
Amplifier Class:Class A-B
Power Output:150 Watts Continuous @ 1% THD+N @ 100Hz
SNR (signal to Noise Ratio):98dB
Amplifier Distortion (THD+N): ≤ 0.1% @-3dB of Max Power Output 20Hz - 200Hz
Input Impedance (Ohms):10 kΩ    Balanced or unbalanced
Ground Lift:On / Off
Low Pass Frequency:50Hz to 130Hz
HPF bypass:with footswitch only
Footswitch:Optional
Phase:0 or 180 degrees
System Volume:-30dB to +6dB
Indicators:Power
Input Connectors:
Stereo RCA for left and right, Stereo balanced TRS for left and right, stereo balanced XLR for left and right
LFE input:N/A
Output Connectors:
Stereo RCA for left and right, stereo balanced XLR for left and right
AC Power Input: Selectable 110V-120V / 220V-240V
Enclosure Construction: 15mm reinforced MDF
Finish: black vinyl wrap
Port Configuration: Front firing slot port
Finish: black vinyl wrap
Grille: Metal Mesh
Dimensions (H x W x D):15" (382mm) x 14" (355mm) x 16.06" (408mm)
Weight: 39 Lbs. (17.7Kg.)


KRK KNS 8400 -   Ready Stock




Overview,

RECORD. MIX. MONITOR. ENJOY.
KRK Headphones provide a precise listening experience that takes you from personal studio to commercial studio to on-the-go track evaluations -- and they allow you to accurately enjoy your music with the consistent voicing philosophy and honest reproduction top producers, studio musicians, performers and engineers have come to trust. KRK headphones provide incredibly natural frequency response that gives you a reference standard unaffected by your location. Day or night. Studio or home. Without disturbing others. Without compromising your tracks. Passionate about music and interested in experiencing the artist's vision as it was intended to be heard? Then experience KRK.

Headphones for Educated Ears.
Looking for a pair of headphones that are specifically designed to replicate music as it should be heard with the ability to satisfy experienced ears? Get your head around this: KRK has always been focused solely on accurate monitoring. The KNS 8400 -- with their ability to reveal exactly what you have on the tracks is an ideal choice for critical listening. Being able to discern the most subtle differences in pitch, timbre and tone helps you to get it right every mix, every take, every performance. Isolating memory foam in the ear cushions delivers improved low end response and because they gently conform to your unique head shape you'll be comfortable wearing them all day.

PERFORMANCE
Accurate, natural and wide frequency response
Class leading KRK sound clarity, very low-distortion
Precise Imaging and extended LF response
High isolation for both noise rejection and leakage

UTILITY
Detachable and replaceable locking cable
Rotating ear cups for travel and storage
Durable, impact resistant materials throughout
Replaceable ear and head cushions

COMFORT
Lightweight construction for use over long sessions
Adjustable low-pressure headband system
Ear and head cushions utilize advanced memory foam
Self-aligning yoke system ensures the best possible fit

Technical Specifications :

Configuration: Closed back, circumaural
System type:Monitor Headphones
Cable: 2.5 m, (8.2 ft.), 99.99% OFC detachable
Ear Cushion type:Acoustic memory foam [KNS-8400]
Headpad Finish:Premium leatherette [KNS-8400]
Nominal Headband Pressure:4 N (based on average head size)
Ambient Noise Isolation: up to 30 dBA [KNS-8400]
Tranducer: 40mm, neodymium
Power Handling Full Range:1000mW
Nominal Impedance: 36 ohms
Frequency Response:5Hz to 23 kHz
Sensitivity (1mW):97 dB SPL
Calculated Max SPL:124 dB SPL
Connector:Gold-plated stereo 1/8" (3.5 mm)
Volume Control:in cord, detachable
Finish:Black impact resistant plastic
Dimensions:3.7" (94mm) x 10.5" (267mm) x 9.6" (244mm)
Weight:0.5 Lbs. (0.23Kg)


KRK KNS 6400 -  Ready Stock




Technical Specifications :

Configuration: Closed back, circumaural
System type:Monitor Headphones
Cable: 2.5 m, (8.2 ft.), 99.99% OFC detachable
Ear Cushion type:Acoustic cellular foam [KNS-6400]
Headpad Finish:Leatherette [KNS-6400]
Nominal Headband Pressure:4 N (based on average head size)
Ambient Noise Isolation: up to 26 dBA [KNS-6400]
Tranducer: 40mm, neodymium
Power Handling Full Range:1000mW
Nominal Impedance: 36 ohms
Frequency Response:10Hz to 22KHz
Sensitivity (1mW):95 dB SPL
Calculated Max SPL:122 dB SPL
Connector:Gold-plated stereo 1/8" (3.5 mm)
Volume Control:N/A
Finish:Black impact resistant plastic
Dimensions:3.7" (94mm) x 10.5" (267mm) x 9.6" (244mm)
Weight:0.46 Lbs. (0.21Kg)


KRK ERGO -  Ready Stock



Overview,

ERGO™ - Powered by RoomPerfect™
A great mix starts with a great recording room. But when it comes to achieving the most accurate mix, your room may have the upper hand. Like any room, your studio's acoustics include offending frequencies and room reflections, and none of these are helping your mix. Getting a handle on these problems has traditionally meant the installation of soft foam or fabrics, and that's a great start. But now you can get even closer to a perfect room, and a perfect mix, because the future of studio sound is here, and it's called ERGO.

Hear the difference
KRK, long known for highly accurate studio monitors brings you ERGO (Enhanced Room Geometry Optimization). ERGO is for the recording engineer, DJ, or musician that monitors in less-than-perfect acoustic conditions. ERGO is an audio recording interface / room correction system designed to measure and analyze phase/frequency problems within a listening environment. The powerful digital signal processor in the ERGO unit processes audio to correct for the offending issues. So, you can stop worrying about your studio's acoustics and start focusing on your mix!

ERGO's high-end sound quality makes it perfect for the discriminating audio professional, while the affordable price puts it within reach of the typical recording hobbyist. Every studio needs an ERGO, because even the most accurate monitor in an imperfect room isn't going to solve mixing problems, but ERGO will. ERGO also makes your mix translate from the studio to different environments. How good is a great rack that only sounds great in your room? With ERGO, your mix sounds great everywhere you, or your fans want to hear it. Want better sound, and in more places? Put ERGO in the mix.

ERGO consists of the ERGO hardware unit, a measurement microphone, and the required software. These three pieces are used to measure and analyze phase/frequencies problems within a listening environment.

The best approach
While conventional room correction systems utilize simple analysis and limited bands of EQ (often fewer than , ERGO uses multiple measurements and proprietary algorithms to create a 3D image of the room, and then applies 1024 dynamic filters to control the audio environment. Our 3D model allows users to preserve the "good" characteristics of the room, while correcting the bad... ERGO doesn't color the sound or produce an artificially sterile environment. ERGO produces the best mix for a given room; a mix that will translate better to other listening environments, since it was mixed in a "perfect" room.

Room perfect technology
The sophisticated room analysis and correction system within ERGO, called "RoomPerfect" was developed by Lyngdorf Audio in Denmark after many years of R&D work. The patented algorithm in the system compares many measurements and corrects for phase and frequency problems using thousands of filters, not just a few. The result is the most accurate mix. ERGO, analyze this!

Lyngdorf Audio utilizes some of the best audio engineers in the world to develop superior technology. Lyngdorf Audio is the industry leader and cutting-edge digital audio company and we are proud to exclusively license their technology.


For More Info Contact Us  :

LAMUSICA

JL.Tebet Raya No.58b Lt.3
    Jakarta Selatan

Phone,
021.68987711
085691000082
08129888400

Email,
Lamusica_dj@yahoo.co.id

[KRK VXT Series]

KRK VXT Series

Professional Studio Monitor For DJ & Musicians




Overview,

Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a widersweet spot the VXT monitors achieve a new level of precision.

The domed tweeter (comprised of true silk for fast transient response) and the new woofer design (with its stiffer, lighter cone that provides low distortion and extended low-end) both have vented formers to remove heat and reduce the effects of power compression, enabling these monitors to maintain their sonic signature.

With uncompromising attention to detail that includes tamper resistant switch covers, integrated Omni Mount support and more, the VXT Series is an outstanding choice for a broad range of monitoring applications.

At KRK, our focus has always been to make the most accurate studio monitors available at any price. So when you use a VXT powered monitor, you can be confident that you get the most accurate reproduction of your mix. VXT's diffraction-limiting curved surfaces, silk-domed tweeter, seamless crossover, and KRK's trademark yellow Kevlar woofer bring superior audio imaging, outstanding transient response, and amazing detail. For over 20 years, KRK has mastered the art of recording monitors, and the VXT is the culmination of this art. Listen for yourself, and believe!

Radical curves for better imaging. The molded shape of the VXT allows for radically curved surfaces that sound better. Traditional rectangular speakers suffer from diffraction as sounds leaving the edge of the cabinet are reflected back into the sound field causing phase distortion. The VXT virtually eliminates diffraction and delivers excellent imaging characteristics and a much wider sweet spot. There are no discontinuous elements to create diffraction.

Ports Where They Belong. Take a look at competitive monitors and you'll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners amplifying low frequency information which will color your mix. The superior design of the KRK VXT include front-firing ports, which are just the right shape to reduce port turbulence. You'll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.

The VXT uses high-tech ABS Structural Foam in its cabinet. This material is very rugged and extremely impact resistant, and makes it possible for KRK engineers to create a speaker with no internal parallel walls, thereby preventing sound-coloring internal nodes. This material also has far better damping characteristics than traditional speaker materials which eliminates coloration caused by cabinet resonance.

Revolutionary materials, Revolutionary Sound The new, stiffer, lighter woofer cone has an extruded aluminum pole piece and vented formers. This improves transient response, reduces distortion and extends low-frequency response due to this lighter, stiffer cone. The aluminum pole piece and venter formers eliminate overheating which improves performance.

Catch A Wave, For A 3D Mix Our recessed silk-domed tweeters provide amazing high-end detail. Our careful design of dome and waveguide geometry coupled to the curved front baffle are optimized for on and off-axis linearity resulting in excellent imaging and a wider sweet spot.


KRK VXT 4 -  Ready Stock



Technical Specifications :

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:4" Woven Kevlar woofer
High-Frequency:1" soft dome tweeter
Frequency Response:66Hz - 22kHz (+/- 3dB)
Max Peak SPL:107 dB
Amplifier Class:Class A-B
Power Output:45W
High Frequency:15W
Low Frequency:30W
Input Impedance (Ohms):10 K Ohm balanced
System Volume:(-30dB - +6dB)
Auto Mute:(on / off)
Indicators:Power, Clip, Limit
Indicator Control:Clip Indicator (On / Off / Limit)
Input Connectors:
Balanced 1/4"/XLR Combo
Ground Lift:On / Off
AC Power Input:
Selectable 110V-120V / 220V-240V (50Hz - 60Hz) or 100V (50Hz - 60 Hz)
Enclosure Construction:Structural Foam
Finish:Black Textured Paint
Port Configuration:Front firing slot port
Grille:Optional
Mounting:Bottom
Compatable OmniMount:20.5 WBX
Dimensions (H x W x D):10" (254mm) x 7.34" (186mm) x 7.48" (190mm)
Weight:14 Lbs. (6.36 Kg.)


KRK VXT 6 -  Ready Stock




Technical Specifications :

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:6" Woven Kevlar woofer
High-Frequency:1" soft dome tweeter
Frequency Response:49Hz - 22kHz (+/- 3dB)
Max Peak SPL:111 dB
Amplifier Class:Class A-B
Power Output:90W
High Frequency:30W
Low Frequency:60W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:+1dB shelf / Flat / -1dB shelf
LF Level Adjust:whole, half, quarter
System Volume:(-30dB - +6dB)
Auto Mute:(on / off)
Indicators:Power, Clip, Limit
Indicator Control:Clip Indicator (On / Off / Limit)
Input Connectors:
Balanced 1/4"/XLR Combo
Ground Lift:On / Off
AC Power Input:
Selectable 110V-120V / 220V-240V (50Hz - 60Hz) or 100V (50Hz - 60 Hz)
Enclosure Construction:Structural Foam
Finish:Black Textured Paint
Port Configuration:Front firing slot port
Grille:Optional
Mounting:Bottom
Compatable OmniMount:30.0 WBX
Dimensions (H x W x D):14.36" (365mm) x 10.35" (263mm) x 9.66" (245mm)
Weight:27 Lbs. (11.6 Kg.)


KRK VXT 8 -  Ready Stock



Technical Specifications :

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:8" Woven Kevlar woofer
High-Frequency:1" soft dome tweeter
Frequency Response:37Hz - 22kHz (+/- 3dB)
Max Peak SPL:114 dB
Amplifier Class:Class A-B
Power Output:180W
High Frequency:60W
Low Frequency:120W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:+1dB shelf / Flat / -1dB shelf
LF Level Adjust:whole, half, quarter
System Volume:(-30dB - +6dB)
Auto Mute:(on / off)
Indicators:Power, Clip, Limit
Indicator Control:Clip Indicator (On / Off / Limit)
Input Connectors:
Balanced 1/4"/XLR Combo
Ground Lift:On / Off
AC Power Input:
Selectable 110V-120V / 220V-240V (50Hz - 60Hz) or 100V (50Hz - 60 Hz)
Enclosure Construction:Structural Foam
Finish:Black Textured Paint
Port Configuration:Front firing slot port
Grille:Optional
Mounting:Bottom
Compatable OmniMount:60.0 WBX
Dimensions (H x W x D):17.06" (433mm) x 12.51" (318mm) x 11.66" (296mm)
Weight:41 Lbs. (16.5 Kg.)


For More Info Contact Us  :

LAMUSICA

JL.Tebet Raya No.58b Lt.3
    Jakarta Selatan

Phone,
021.68987711
085691000082
08129888400

Email,
Lamusica_dj@yahoo.co.id

[KRK ROKIT Series]

KRK ROKIT Series

Studio Monitor For DJ & Musicians




Overview :

The KRK Rokit Series takes value-priced monitors to a new performance level. All of the great stuff that Rokit's have been known for (front-firing bass port, soft-domed tweeter, glass aramid composite yellow cone) are still there, but the G2 Rokit's feature refined voicing and a new curved baffle that looks great, reduces diffraction and provides even better monitoring accuracy.

Studio Monitor Series from KRK Systems. For years the Rokit series has been a popular choice for accurate monitoring in studios large and small. Now the all new Generation 2 RoKit provides a new standard for even better performance and accuracy, raising the bar once again.

No Pain With Gain
Why compromise gain structure to achieve a comfortable listening level? As musicians and recording people ourselves, we've asked that question too. So each Generation 2 Rokit comes with an Input Volume Control that provides an adjustable gain range from +6dB to -30dB. Just another way the Rokit lets you focus on your mix, and not on compatibility concerns.

Catch A Wave, For A 3D Mix
Recessed tweeters may look the same, but they don't perform the same. KRK has designed a superior tweeter wave guide for the Rokit that provides optimal high frequency pattern control and focuses the sound outward, away from the cabinet. More conventional designs direct sound along the plane of the cabinet where waveform interaction can cause phase problems and increased diffraction. KRK knows a properly engineered high frequency wave guide is a critical component to great sound, and one key to our award winning performance.

You've Got Connections
At KRK our focus is your mix. But it doesn't stop at creating accurate monitors. We live this stuff and appreciate the need for monitors that not only sound great but work easily into your particular set up. That's why you'll find plenty of input options with your Rokit, sure to accommodate any studio environment. So if it's RCA, Quarter-Inch (balanced/unbalanced) or XLR inputs you require, Rokit has got you covered.

Even More Accurate Than Before
We took a great monitor series and made it better. Our engineers and listening panel took the Generation 2 Rokits' speaker voicing to even more accurate levels. What you hear is what you are intended to hear, coloration is not part of the spec. This performance is brought to you by drivers that are custom-designed by our world-class studio monitor engineering team, for clear, low-distortion performance.

Take Control
While your Generation 2 Rokit leaves the factory voiced to our demanding specs, KRK also knows that no two rooms "sound" the same. As such, each Rokit comes equipped with a High Frequency Level Control. This feature provides specific adjustment of high frequency output most commonly affected by room acoustics. It's just one extra level of control that KRK gives you to ensure the most accurate mix for your particular room's acoustics.

Don't Be Square, Curves Ahead
Our new Rokit looks different, so it can sound better, and in a wider "sweet spot". Traditional rectangular speakers suffer from diffraction as sounds leaving the edge of the cabinet are reflected back into the original sound field, and at different time intervals. This phase distortion creates a "narrow" or boxy" sound. The Generation 2 Rokit series eliminates this issue with radically engineered curved surfaces, so diffraction is virtually eliminated. Simply put, you'll get better sound in a wider area.

Let's Be Up Front
Take a look at competitive monitors and you'll find ports on the back of the cabinet. These rear-firing ports tend create bass coupling with walls and corners amplifying low frequency information which will color your mix. The superior design of the KRK Generation 2 Rokit's include front-firing ports, which are just the right shape and taper to reduce port turbulence. You'll appreciate the clean and accurate bass performance, this approach delivers, even at high SPL's.

Power Up!
A great sounding monitor doesn't stop with a great cabinet and custom drivers. Our true bi-amplified amplifier system provides discrete low-distortion power for each driver. While our active crossover systems provide smooth and accurate frequency response, and again, accurate diffraction control.



KRK Rokit RP-5 G2 -  Ready Stock



Technical Specifications :

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:5" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:52Hz - 20kHz
Max Peak SPL:106 dB
Amplifier Class:Class A-B
Power Output:45W
High Frequency:15W
Mid-Frequency:N/A
Low Frequency:30W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
AC Power Input:
Selectable 110V-120V / 220V-240V (50Hz - 60Hz)
or 100V (50Hz - 60 Hz)
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (H x W x D):11.1" (282mm) x 7.28" (185mm) x 9.06" (230mm)
Weight:14 Lbs. (6.4 Kg.)


KRK Rokit RP-6 G2 -  Ready stock



Technical Specifications :

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:6" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:48Hz - 20kHz
Max Peak SPL:107 dB
Amplifier Class:Class A-B
Power Output:68W
High Frequency:18W
Mid-Frequency:N/A
Low Frequency:50W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
AC Power Input:
Selectable 110V-120V / 220V-240V (50Hz - 60Hz)
or 100V (50Hz - 60 Hz)
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (H x W x D):13" (330mm) x 8.82" (224mm) x 10.87" (276mm)
Weight:19 Lbs. (8.8 Kg.)


KRK Rokit RP-8 G2 -  Ready Stock



Technical Specifications :

Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:8" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:44Hz - 20kHz
Max Peak SPL:109 dB
Amplifier Class:Class A-B
Power Output:90W
High Frequency:20W
Mid-Frequency:N/A
Low Frequency:70W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
AC Power Input:
Selectable 110V-120V / 220V-240V (50Hz - 60Hz)
or 100V (50Hz - 60 Hz)
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (H x W x D):15.5" (394mm) x 10.83" (275mm) x 11.73" (298mm)
Weight:26 Lbs. (12 Kg.)


KRK Rokit RP 10-3 -  Ready Stock



Technical Specifications :

Configuration:3-Way
System type:Active Studio Monitor
Low-Frequency:10" Aramid Glass Composite woofer
Mid-Frequency:4" Aramid Glass Composite Midrange
High-Frequency:1" soft dome tweeter
Frequency Response:31Hz - 20kHz
Max Peak SPL:113 dB
Amplifier Class:Class A-B
Power Output:140W
High Frequency:30W
Mid-Frequency:30W
Low Frequency:80W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
AC Power Input:
Selectable 110V-120V / 220V-240V (50Hz - 60Hz)
or 100V (50Hz - 60 Hz)
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (H x W x D):21.2" (540mm) x 12.7" (325mm) x 14.3" (365mm)
Weight:46 Lbs. 21 Kg.)


For More Info Contact Us  :

LAMUSICA

JL.Tebet Raya No.58b Lt.3
    Jakarta Selatan

Phone,
021.68987711
085691000082
08129888400

Email,
Lamusica_dj@yahoo.co.id

oh iya bisa beli terpisah ya..

om,, om,, mau d jual brp tuh...

@ dj ozsy
iye nih sob, bikin malu aj 

main2 k studio donk


@ Syndromatic
hehehe,, thx bgt yah sob,, latihan d sini lg donk 

@ chiefy

Thx bgt yah sob,, main2 k studio lg donk 

@ flicker
duh ndrooooo bikin malu aj,,
plissss apus,, klo ga ganti yg bagusan donk 

up.up.up..

ayo,,ayo,, harga terjangkau...

gak boleh kurang mbak harganya..? pasnya brapa nich mbak ?

Thx yah sob,, klo sempet mampir2 yah k studio.... 

YOHO..... DAH ADA GAMBARNYA NICH....... HEHEHEHEHEEEEEE..........


ASYIK....ASYIK.......

[-LaMusica-]

For Sale :

2 Pcs Pioneer CDJ 100s
Kondisi 95%an,, barang rumahan, tanpa dus buku.
Rp.4.900.000,-

1 Pc Behringer DJX 700
Rp.1.100.000,-

1 Pc Pioneer DJM 300s
Rp.2.500.000,-

For more info contact us :

-LaMusica-
JL.Tebet Raya No.58b Lt.3
Phone : 021.70376761
            08129888400

Thx...

[TECHNICAL SPECIFICATIONS:]

DENON DNS-1200 - Digital Media Player

The denon dns1200 is a cd player, media player & midi controller. Compact in size, black in colour and equipped with remarkable features this deck offers features for traditional cd dj's, mp3 dj's and even software dj's. Featuring the same level of performance as the dns1000, the deck offers 2 hot cues, 2 loops, a vinyl emulating jog wheel, key lock, variable pitch range and a selection of amazing effects including filters, flanger and ehco loop (auto beat loop). You can playback music from cd, mp3s from usb storage devices (including memory sticks, mp3 players and harddrives) and you can also use the deck as a hands-on controller for software, including traktor, serato scratch live and other leading programmes. With an amazing level of creative placed in front of any dj who is fortunate to use it, the dns1200 is an extremely versatile, forward thinking and future proof deck making it a very viable, and affordable alternative to the so called 'industry standard' usb compatible decks.


TECHNICAL SPECIFICATIONS:

* Front loading single cd deck with usb & midi
* Cd, cd-r, cdrw & mp3 compatible
* Playback media from usb devices (mp3 via usb connection)
* Midi control function (use deck to control software eg. Serato scratch live, traktor etc)
* +/-4, 10, 16, 24, 32 and 100% pitch range
* Instant start
* Disc remain, track remain, time elapsed display features
* 12.7cm scratch jog wheel
* Fast/manual track search
* Quick jump search facility with 1/75 sec accuracy
* +/- 100% master tempo
* Bpm counter (3 bpm setting)
* Two hot cue points
* Two seamless loops with loop adjust
* Full cd/mp3 vinyl emulation & scratch play
* Cross fade between two tracks on one deck
* Phono output
* Digital output
* 4 in-built effects: flanger/filter/echo & world's first echo loop
* Fader start
* Line level / digital output


Weight: 4.0kg (including packaging)
Height: 35.0cm x Width: 24.0cm x Depth: 39.0cm
Warranty: 1 year
Power: 240V / 220V Only

UP,,UP,,UP.....