jual SAMPLER KORG electribe es-1 (2nd) special price -SOLD-

[NEUROLAB]

Dijual sampler electribe korg es-1 (2nd)

kondisi 90% 

os 1.06

kardus & manual book lengkap


hubungi: 088218017543 (bandung)

[AD 13 T]

potonya donk box...

[NEUROLAB]

ni fotonya

[NEUROLAB]

nih fotonya

[kitakami]

diliat  dl..
-Arrie-

[mukemen]

boleh tau nettnya berapa? tq

[NEUROLAB]

 

1,5jt -> plus smartmedia (2nd) 32mb + bonus banks sound drumkit roland 909/606/kraftwerk ((single shot (wav)) + os 1.04 & os 1.06 & os es1MKII + software converter/unziper banks files into wav

ok thnx u

[mukemen]

itu men bodynya kotor ? apa begitu

[NEUROLAB]

yoi bodynya emg kaya gt

gw pake dari gw beli baru ampe skarang
kalo ga gw pake kale bodynya ga kaya gt kale

lu mo maen perlu bodynya atow circuit dalemnya ??

[NEUROLAB]

untuk yg berminat hubungi: 088218017543 (bandung)


cash n carry
skalian liburan ke bandung
ambil sendiri samplerna.

thnx u

[NEUROLAB]

tidak menerima pembelian via tranfser  rekening bank.

thnx u

[NEUROLAB]

http://www.topdjgear.com/koesels.html

Korg ES-1 Electribe S

A sampler that lets you process samples and create a signature sound with multiple effects/filters - Then assign the parts to a sequencer and tweak away!

Sample and go!

The ELECTRIBE·S is a new type of sampler that doesn't simply play back a recorded sound - it lets you aggressively process the samples to create your own signature sound. Play any sound or phrase in and use the pitch, filter and effects knobs to drastically alter the sample.

Slice loops with Time Slice

Chop a sampled phrase or sound into pieces with the ELECTRIBE·S' Time Slice function. Time Slice detects the attacks of each part within a loop (e.g., bass drum, snare, and hi-hat), so that these parts can be massaged separately. You can also use the knobs to modify the tone of a phrase processed by Time Slice, creating complex patterns from a simple loop or phrase.

Realtime resampling

With the resampling function, you can apply effects to a previously-recorded sample and then resample the result. You can even resample while modifying parameters such as pitch in realtime, and create even more new sounds with absolutely no deterioration in audio quality.

Instant rhythm creation

Assign sampled sounds to up to ten parts, then use the step sequencer to create rhythm patterns. The step sequencer's sixteen pads divide a measure (or two measures) into sixteen parts. You decide where you want each sound to play by touching the desired keypads to create a pattern. And with the touch of a button you can add rolls or reverse playback for each part, so you can easily create highly complex rhythms that used to take ages to program in.

Add and change effects with the Motion Sequence function

You're in complete control of sound alteration. With the Motion Sequence function, every tweak of a knob can be recorded as part of the rhythm pattern. Alter your tone at will on each part using one of the following parameters: pitch, filter, level, or pan. Then, with the Motion Sequence assign effect on/off, roll, and reverse playback for each part (all three can be recorded per part). Plus you can apply an Effect Motion Sequence (a motion sequence for effect parameters) and a Delay Motion Sequence to the entire pattern.

Radical sample processing

In addition to a master delay effect, you get a built-in effects processor with eleven types of effects, that can be switched on/off for each part. The eleven types include basic effects such as Reverb and Flanger/Chorus, as well as unique effects like Decimator, Isolator, and Resonant Filter. Effect parameters can be edited using the knobs, and knob movements can be used as part of the rhythm pattern in the form of a Motion Sequence. The sound processed by the effects can also be sampled again. The internal memory of the ELECTRIBE·S can hold 128 user patterns. Combine up to 256 patterns/steps to create a song, which can be stored in one of sixteen internal song memories.

Store your data with Smart Media

The ELECTRIBE·S provides a Smart Media slot for storing data. 3.3 V Smart Media ranging from 4 MB to 64 MB can be used to store your own sampled sounds, patterns and songs. The ELECTRIBE·S can also load AIFF and WAV files via Smart Media, allowing you to take advantage of sampled data stored on your computer.

The word is in

The ELECTRIBES kick ass. Their thick, meaty analog sounds are making their own unique contribution to global mayhem. But we're not done with our radical donation to the rhythmic revolution. Introducing the ELECTRIBE·S, a sampler with a sound that is as fat and gritty as ever. And in true ELECTRIBE fashion, the ELECTRIBE·S is packed with tweakable knobs for extreme sound editing, and sixteen pad keys to program rhythm patterns and break beats.

Specifications

Sampling Frequency: 32kHz Maximum Sampling Time: 95 (mono) / 47.5 (stereo) seconds, saving to internal memory Number of Samples: 100(mono) + 50(stereo) Memory: 128 patterns, 16 songs Effects: 11 types (reverb, flanger/chorus, phaser, ring modulator, pitch shifter, compressor, distortion, decimator, isolator, resonant filter, wah), Delay (master delay) Sequencer: Pattern: 64 steps maximum per part, motion sequence, 1 parameter per part, 64 events, effect on/off, roll, and reverse can be recorded for each part (all three can be recorded for each part) Song: 256 patterns maximum per song Input: AUDIO IN (1/4" stereo phone jack, Level switch LINE / MIC, Gain adjustment knob) Nominal Input Level: -10dBu LINE, -50dBu MIC Input Impedance: 47k-ohms Output: L/MONO, R, (phone jack - mono x 2), Nominal Output Level = -10 dBu, Output Impedance= 1k-ohm, Headphones (1/4" stereo phone jack), Nominal Level= 21mW + 21mW @ 32-ohms External Memory: SmartMedia (TM) (4 to 64 MB, 3.3V) AD/DA Conversion: 20 bit linear o MIDI: IN, OUT, THRU Power Consumption: 6W Power Supply: DC 9V (AC adaptor) Accessories: AC adaptor (DC9V, 600mA) Dimensions: 300(W) x 224.9(D) x 55.4(H)mm, 11.8"(W) x 8.8"(D) x 2.2"(H), (Including rubber feet) Weight: 1.28kg / 2.83 lbs Number of Parts: 12 (One Shot = 9 parts, Time Slice = 1 part, Audio In = 1 part, Accent = 1 part)

[NEUROLAB]

;Dmore pic kick ass machine

[NEUROLAB]

kondisi 90%

knobs puter, pad bar, card reader masih berfungsi

pad bar gw tuker ama em1 biar masih enak mencet2na 
karna emg ni barang gw pake dari fun2 ampe works kaga jadi pajangan sebelah Vas bunga


last song sampling n resampling dari hasil mesin ini bisa di liat di forum production music
(remix gosip) versi di sequence ulang samplesna di fruity loops dgn soundacard onboard standard

[NEUROLAB]

buat yg berminat beli silahkan hubungi (gw bs kasih adress home gw di bdg tuk ktemuan
n u bs tes alatna dl)

buat yg berminat beli, gw cuma trima cash okeyy
u cocok harga n cocok alat
pay cash n take n go home

tuk yg udah menhubungi gw via tlp/sms

*sorry aja nih gw tuk jual beli masih lebih percaya pake cara konvensional aja
n diutamakan tuk buyer yg brani ketemuan ama gw
*sorry gw ga jualan smartmedianya doank okey


ayo ayo siapa cepat dia dapat hehehehehe

[m1d1d4t4]

sampler asik nih, pernah punya juga dulu. kalo untuk sample2 drum atau yg pendek2 sih oke, cuma ga bisa panjang2. step sequencernya juga cuma 64 step, jadi kalo mau bikin full song kadang musti bikin sampe 10 pattern lebih outputnya nggak transparan, tapi justru ini yg memberi "warna" pada outputnya, agak2 gritty2 gitu walopun nggak sekasar ASR-10

[NEUROLAB]

ehm ehm eheheheh

hello there !
feeling good ?

what we got here is a way to control-more with the Korg Es-1.
folow those instructions and you'll be a happier person !!

this is a way to change the es-1 NRPN to controllers, meaning you'll have 9 knobs where each knob is a different controller.
(for example - to control Reason !)

the ingredients :
- KORG ES-1, connected to your computer via MIDI.
- MIDI-OX, a free program to manipulate midi messages, download from : www.midiox.com
- MIDI YOKE, a free program that is a virtual midi cable, download from : www.midiox.com
- the .oxm file included.

preparations :
- install both MIDIOX and MIDI-YOKE on your computer

modus operandi :
- in MIDIOX, choose Options > MIDI Devices.
  over there choose your Input and Output.
  * if you are using MIDI-YOKE : choose a junction number as output.
                                 then later, on another program (Reason !?) choose the SAME junction number as the MIDI Input.
- in MIDIOX, choose Options > Data Mapping,
  over there "load" the .oxm file included, check the "Turn Map On(after OK)", press ok.


                                   THATS ALL !! NOW EACH KNOB IS A CONTROLLER !!!

if using Reason :
- in Reason, choose Edit > Preferences.
  go to MIDI.
  in the "Remote Control" list choose the SAME "MIDI Yoke Junction" number as you choose in MIDIOX output.
- close window
- right click any knob/slider to be controlled
- choose  "Edit MIDI Remote Mapping..."
- choose the "Learn From MIDI Input" box
- turn one of the ES-1 knobs,
  you should see data input signal in the "MIDI Received" and the number of the controller in the "Controller" window.
- OK this

                                NOW YOU HAVE CONTROL !!!

[NEUROLAB]

Ayo ayo control reason mu ( kendalikan alasanmu huahahahahahahaha)

[NEUROLAB]

Ayo ayo control reason mu ( kendalikan alasanmu huahahahahahahaha)

[NEUROLAB]

-SOLD- Sudah terjual pada lili (fugue) thnx lili (fugue) thnx god thnx ravlex

god bless u

[m1d1d4t4]

masaoloh lily borong barang

[fugue]

bwat keponakan gw maen drmh ted hehehe...............