Loader

Firewire Adapter Buat Producer/Remixer/Dj

Started by The Little MIDI Store, 13/04/12, 11:29

Previous topic - Next topic
13/04/12, 11:29 Last Edit: 19/03/15, 16:48 by The Little MIDI Store
Sonnet Firewire Adapter 400 To 800 (9PIN to 6PIN)





Sound/Audio Interface Anda Sering Dropout/Putus2 ??

SONNET FIREWIRE ADAPTER


Macbook, iMac & semua gadget apple keluaran baru tidak menyediakan firewire port 800. Akibatnya user mengunakan kabel optional atau adapter aftermarket dan kwalitas kabel atau adapter aftermarket tidak terjamin hingga terkadang meyebabkan audio dropout atau terputus putus.Solusinya adalah meggunakan SONNET FIREWIRE ADAPTER 400 TO 800.



PRODUCT PICTURES

bill-sonnet-firewire-adapter-417x285.jpgPicture-5.png


PRODUCT OVERVIEW

No FireWire 400 Port on Your Computer?
Avoid Hassles—Just Adapt!

Sonnet's FireWire 400-to-800 adapter makes it easy to connect your FireWire 400 (1394a) peripherals to the latest Mac Pro, MacBook Pro, Mac mini, iMac, or any other computer with FireWire 800 (1394b) ports, without the trouble of purchasing yet another cable. Which cable to get? What length? Why bother—use your existing FireWire 400 cables with this simple adapter from Sonnet to connect devices to a FireWire 800 port. Just plug it in between a FireWire 800 port and a standard FireWire 400 cable's 6-pin male connector (the other end of the cable plugs into your FireWire device). It can't get any simpler.

Sonnet's FireWire 400-to-800 adapter makes it easy to connect your existing Firewire 400 peripherals to the latest computers with FireWire 800 ports.

Key Features

Provides a simple way to connect FireWire 400 devices to the latest Mac Pro, MacBook Pro, Mac Mini, iMac and all other computers with a FireWire 800 port

Works with onboard FireWire 800 ports, as well as those on adapter cards like Sonnet's Allegro™ FireWire 800

9-pin male (FW800) to 6-pin female (FW400) connector adapter works with standard 6-pin male FW400 cables

IEEE 1394 compliant

side-fw400-800_1010.jpg

Sonnet's FireWire 400-to-800 adapter features a 9-pin male connector that plugs into your computer's FireWire 800 port. The other end of the adapter features a 6-pin female FireWire connector that any standard 6-pin male FireWire 400 cable can plug into. Fully IEEE 1394 compliant, this adapter allows you to avoid the hassles of new cables and computer upgrades.


PRODUCT REVIEWS

   • http://www.technologytell.com/apple/53643/appletell-reviews-sonnet-firewire-400-to-800-adapter/


PRODUCT WARRANTY

   • 3 Months Warranty


PRODUCT PRICE

   • Rp.325,000
      (Note: Prices may vary due to USD/IDR Fluctuation)


SONNET FIREWIRE YIN YANG 400/800 MINI HUB



PRODUCT PICTURES
Sonnet_Yin_Yang_Hub.gifsonnet_yin_yang_hub.jpgyinyang_ports.jpg



PRODUCT VIDEOS


Sonnet Firewire Adapter YIN YANG Overview



PRODUCT OVERVIEW

"Y" Not Have it Both Ways?

Are you a longtime Mac user? If so, you've probably purchased a few peripherals along the way—devices like DV camcorders, external drives, and even an old iPod® or two—and some of them probably have FireWire 400 interfaces (a.k.a. IEEE 1394a and iLink®). Your older Mac probably had at least two FireWire ports, so connecting more than one of those devices at the same time was easy. But, if you've purchased a new iMac, Mac mini, or MacBook Pro in the last couple of years, you may have run into a couple of problems when you tried to connect those great devices—there's only one FireWire port, and the connectors didn't match! Sonnet's Yin•Yang FireWire 800 to FireWire 400/800 mini hub solves both problems.

yinyang_ports.jpg

Yin•Yang plugs into the single FireWire 800 (IEEE 1394b) port found on most new Mac computers and enables you to connect and use a FireWire 400 device (the Yin) and a FireWire 800 device (the Yang) at the same time. Yin•Yang doesn't need one power adapter, yet it will support a bus-powered 2.5" drive on either port. Fully IEEE 1394 compliant, this mini hub requires no drivers, supports all industry standard FireWire peripherals, and allows you to plug in and disconnect devices without shutting off your computer.

Key Features

Provides a simple way to connect both a FireWire 400 device and a FireWire 800 device at the same time to a single FireWire 800 port on your computer

Supports concurrent data transfers to and from two attached devices at 800 Mb/s and 400 Mb/s, respectively

Operates without an external power supply

Supports one bus-powered device on either port

Allows you to plug in and disconnect peripherals without shutting off your computer

Small and rugged—the hub case measures just 1.9" x 1.5" x .6", and the attached cable 3" long

Yin•Yang is very small and rugged. The hub housing is about the size of a matchbox, and the attached cable is only three inches long. Whether you use Yin•Yang at home or on the road, you'll get expanded connectivity for all of your FireWire devices.

Sonnet's Yin•Yang FireWire 800 to FireWire 400/800 mini hub makes it easy to connect a wide range of FireWire 400 and 800 peripherals to notebook and desktop computers with only FireWire 800 ports.

yinyang_size_010411.jpg   


PRODUCT REVIEWS

   • http://www.macworld.com.au/press/sonnet-introduces-yinyang-firewire-mini-hub-21819/
   • http://www.adorama.com/SNTFHB8284.html



PRODUCT WARRANTY

   • 3 Months Warranty



PRODUCT PRICE

   • Rp.700,000
      (Note: Prices may vary due to USD/IDR Fluctuation)



HOW TO PURCHASE

   • Contact us
   • Deals can be done VIA COD - Bandung
   • Items can be sent VIA TIKI/JNE to all regions (Shipping fees are held responsible by buyer)
   • REKBER is recommended for shipping.



CONTACT INFORMATION:

Please do call us for more information, reviews, pricing, and simply anything else you want to ask about DJ products (even those not listed by us). We love to help.

Contact:
The Little MIDI Store
Call: 08170060050
Email: thelittlemidistore@hotmail.com
BB PIN:  2B9D1A6D



LINK: http://www.facebook.com/profile.php?id=100002460115550