RESOLUME 2.4 BETA NOW AVAILABLE!

[vj roobs]

RESOLUME 2.4 BETA NOW AVAILABLE!

[Gober]

ya...

dan dalam waktu yang sama Arkaos keluar versi 3.6

Whats new :
Resolume : Beat matching, DMX support
Arkaos : multi display support

[libreprojects]

wahhh...seru nih....dua software baru sekaligus...keluar...ayoo kita ajeb2 terus visualnya...

[ican*agoesdjam]

ckckckckck....waduhhh.....resolume 2.3 aja belom kesampean make buat perform (msh nyoba di rumah) eh dah nongol yg baru...ciamik deh......

[libreprojects]

vizuale:
saya cinta arkaosss.....di tambah motiondive...dah cukup..engga perlu banyak2...

choro:
arkaos aja dehh...dah cukup...motiondive juga ok...

jessica:
arkaos only

digital hallucination:
apa aja hayuuuu.....yuuuu

[sin.AD]

resolume itu apa ya ?

[Ricco.Sepet]

  Resolume 2.4 beta now available!

Finally a new Resolume version comes scorching from the heat of our headquarters in The Hague, Holland. As previously announced we are now releasing a beta version of Resolume 2.4. With some exciting new features and massive speed improvements, this version is smokin!

BPM Clock
With the BPM clock in Resolume it is very easy so synchronise video clips to the tempo (Beats Per Minute) of the music. By setting the the video clips in BPM mode the speed of the clips is automatically adjusted to fit in any number of beats. The BPM clock can be set manually or can be linked to an external Midi clock.

With this function your visuals are so easily synchronised to the beat of the music! The BPM clock can also be used to drive effect parameters and to have them play synchronised to the music.

Checkout the BPM clock chapter in the manual for instructions.

DMX
DMX can be used to control Resolume but also to send DMX signals from flash movies playing in Resolume. This enables you to integrate your visuals and video with lights, strobes, lasers, moving heads, LED panels and any other device that is DMX compatible. DMX signals can be send via Artnet over a computer network or via USB with the Enttec DMX USB Pro Interface.

Check out the DMX chapter in the manual for instructions.


Speed improvements
We took some extra time to totally dissect the Resolume engine and Edwin was able to improve the playback speed dramatically, with one layer playback framerates can be up to 80% faster and running multiple layers can be up to 10-20% faster. So if you were thinking about switching from 320x240 to 640x480 now is the time to try it out.

Other improvements & changes
- Effects now have a little feedback button, use this in combination with the opacity slider to directly apply feedback to an effect.
- The layer opacity can now be animated just like an effect parameter, it just looks slightly different because all the buttons are vertically aligned.
- The FFT audio analyser is much more accurate, it could even be usefull on drumm 'n bass music ;-)
- Freeframe plugins can be in different subdirectories, all subdirectories below the plugins folder are scanned and placed in different categories
- Capture driver list can be refreshed to be able to access camera's that have been connected after having started Resolume. This is convenient because you might forget to turn on your camera before starting Resolume.
- Freeframe internal parameter range has been changed to 0-511. Especially when animating parameters this is a good improvement. Animation will be more fluent and accurate.
- Decks, settings and recorded files are now stored in the directory ~/My Documents/Resolume 2.4/ this is to facilitate environments where the user does not have administrator rights. (manly schools)
- There is no longer a 15-day trial period. The output is now watermarked every 2 minutes with the Resolume logo so you can practice as long as you like.
- New FreeFrame effects: Heat It Up, Delay Mask, Brightness RGB & more!

Our private beta testers are very happy with this version but we decided to call it beta just to be on the safe side.

Price change
On september 1rst we are going to raise the price of Resolume from 199 to 229 Euro so get it while it's cheap!

[mutter666motion]

Whats new :
Resolume : Beat matching, DMX support
Arkaos : multi display support

nah ini nih multi display support.. padahal di resolume udah bisa lohh.. kalo PC lu dah pake <misalnya> vga card matrox pirhelia yg bisa 3 display, resolume bisa tuh jadi output nya 3.. 1 untuk monitor lu, 2 untuk feed visual ke projektor /screen.. dan bisa lu pilih yg no 1 dari channel mana, yg no 2 dari channel mana.. or cuman efek nya aja, or source nya aja, or lu buat matrix <di pecah jadi 4 source dalam 1 screen> .. 

[sin.AD]

hidup resolume....

[fLawLeSS]

ada yg tau gak cara nambahin demo atau clip di resolume ??
musti gimana sih ?? ditaro dimana clipnya dan formatnya apa yah ?? 
need help 

[sin.AD]

bukannya tinggal didrag doang dari file ke slot2 yg kosong ?

[fLawLeSS]

gw pgn nambahin demofootage dari potongan2 video gt,
nah itu file kudu ditaro dimana foldernya ?? dan formatnya apa ?? 

[voltus]

video bisa ditaro dimana aja....
klo bisa udah lo bikin folder khusus video2 lo itu....
nanti disamping kiri kan ada browse file.....tinggal browse aja..
lo pilih footagenya trus tinggal drag doang ke kolom2 / slot2 yang kosong...
bis itu klo mau di save..disamping kanan.... dibawah preview ada save deck....tinggal save
trus format yg support klo ga' salah ...avi,mpg,mov,dat,swf,jpg,bmp...

sekalian mo nanya...
ada yang udah nemuin kendala ga' pake resolume 2.4 berhubung masih beta pastinya masih coba - coba....
sering error ga'....
klo gw kadang2 ada footage / daeck yang ga' jalan / ga' keluar....tp setelah di tutup resolumenya dan dibuka lg bisa jalan....
apa komp gw yah.....

[fLawLeSS]

video bisa ditaro dimana aja....
klo bisa udah lo bikin folder khusus video2 lo itu....
nanti disamping kiri kan ada browse file.....tinggal browse aja..
lo pilih footagenya trus tinggal drag doang ke kolom2 / slot2 yang kosong...
bis itu klo mau di save..disamping kanan.... dibawah preview ada save deck....tinggal save
trus format yg support klo ga' salah ...avi,mpg,mov,dat,swf,jpg,bmp...

sekalian mo nanya...
ada yang udah nemuin kendala ga' pake resolume 2.4 berhubung masih beta pastinya masih coba - coba....
sering error ga'....
klo gw kadang2 ada footage / daeck yang ga' jalan / ga' keluar....tp setelah di tutup resolumenya dan dibuka lg bisa jalan....
apa komp gw yah.....

sial sesimple itu, ternyata itu browser, gw pikir cuman demofootage dan plugin yg
dari sononya dah begitu.... hhahaha thanks alot dude 

[voltus]

yup....simple  bgt kan......tp bisa ribet klo loe ngga' mau mengexplor softwarenya....
selamat mencoba 

[fLawLeSS]

yup....simple  bgt kan......tp bisa ribet klo loe ngga' mau mengexplor softwarenya....
selamat mencoba 

heheheh emang kalo mau mengexplor nothing is ribet yah ??
malu saya  , oh iya mau nanya kalo output ke infocus lu biasa pake
resolusi berapa x berapa ??

[sin.AD]

explore software itu gimana sih....??

[SGStronix]

klik start trus cari tulisan explore...

halah....

hehehe

piss bay... ampun bay...

hehehe

[sin.AD]

klik kanan terus explore...hah..bodoh kau ini yab...!!!!

[SGStronix]

ahuehauehauehauehauheuaea

biasa pake mac jd ngga ada klik kanannya....

aheuhauehauehauheauehauea

[sin.AD]

somboooonggg...mentang2 pake Mac....kan bisa klik option..??
btw sob, lo kan bersama band kelas menengah itu..salam ya buat dito..

[SGStronix]

hihihi...

dito... wah iya apa kabar tu orang yak... jarang ketemu juga gw... terakhir ketemu pas puasa... hehehe... nanti gw salamin deh

[sin.AD]

udah kawin kali ya ama nessy..??

[SGStronix]

eh udah ngga mereka... tuh kan jd gosip dah... haeuhaeuhauehauea

[sin.AD]

hah??dari waktu playground udah ngga ya..??*tetep gosip..*